Televes OLT 769401, User Manual

Page: 121 / 482

EN
121
The ONUs Bulk Upgrade table is composed by the following parameters:
Parameter Description
Slot
Selects the Slot to make the upgrades
Pon
Selects the PON to make the upgrades
Auto Selects the ONUs with Software Mode “Auto”
Planned
Selects the ONUs with Software Mode “Planned Version”
Command By pressing Execute command the selected ONT’s will make upgrade
Table 5-71: ONUs Bulk Upgrade configuration parameters
The Software Image Files table is composed by the following parameters:
Parameter Description
Name
Name of the SW version file
Size Size of the SW version file
ONT Profile
ONT profile to which the version applies to
Version SW/HW
SW: Name of the Software version
HW: Hardware to which the Software Version applies to. If it’s blank it applies to all ONT’s
with the selected ONT profile
Description
Description of the Software version
Default Signals that the version is the default version to some ONT profile/HW version
Commands
Apply file : Allows to select one or a group of ONT’s to make upgrade
Set default
: Set’s the default version to some ONT profile/HW version
Table 5-72: Software Image Files configuration parameter
The “Out of Sync Files” Button, Figure 5- , lists all files not synchronized with the local management. These files are not presented in the Software
Image Files Table. The out of Sync files list is shown in a pop up window. The user can remove the files from the system using the “Remove” button
in the pop up window, Figure 5-.
The “Check” Button, resynchronizes the local management with the equipment filesystem.
Remove
3RGW020200r02R
3RGW020200r02Q.w
3RGW020200r02P
NT7SW0000005H 002
15 204 372
15 204 372
15 204 372
1 349 252
Size (KB)
Name
Cancel
Figure 5-91: Out of Sync files list
To add a new ONU Software/Firmware version, Figure 5-92:
Press the Add button,1, and the ONU Software Update dialog Box will appear:
Pressing the “File” field, 2, the Choose file to Upload Dialog box will appear allowing the selection of a file, from a repository,
for example the PC hard disk, to upload to the OLT
Select the file to upload, 3
Finish the upload, 4. The file will then be available at the Software Image Files Table.