Televes OLT 769401 User Manual Download Page 155

Page: 155 / 482

155

6.2.7 DHCP

DHCP Status menu item opens a DHCP Relay window, Figure 6-26, composed by two tables:

Filters: selects criteria to visualize DHCP Relay List,

DHCP Relay List

Figure 6-26: DHCP Relay status Window

DHCP Relay List shows information related with the messages changed between the DHCP clients and servers, indicating the client/MAC/IP

association and the respective lease time. DHCP snooping is only made in DHCP op.82 services.

Filtering can be used, to select and display only the desired entries on the list.

The filter definition criteria parameters are the following:

Parameter

Description

PON

Selection of PON interface to filter from a list of available PON interfaces

Service

Selection of Service Id to filter from a list of available Services

ONU ID

Selection ONU ID to filter by introducing the desired ONU ID

IP Version

Selection of IP version (IPv4 or IPv6)

IPv4/IPv6

Selection of IPv4/IPv6 address to filter by introducing the desired IPv4/IPv6

address

MAC Address

Selection of MAC address to filter by introducing the desired MAC address

Table 6-25: DHCP Relay filter selection parameters

The DHCP Relay List is composed by the following parameters:

Parameter

Description

Port

Indicates the Port for the learned entry

ONU ID

Indicates the ONU for the learned entry

Service

Indicates the service for which the entry was learned

Indicates the client IP Address

MAC

Indicates the client MAC Address

Leave Time
[hh:mm:ss]

Indicates the time it take for the entry to be removed. In case this value is

00:00:00 indicates that there was an IP request from the client (DHCP Request)

and there wasn’t any response from the server (DHCP ACK).

Table 6-26: DHCP Relay List parameters

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands