Televes OLT 769401 User Manual Download Page 311

Page: 311 / 482

311

7.6.11.5.2 “remove” command

This command deletes the IP route. There can only be one IP route.

Name

remove

Description

Deletes the current IP route.

Full path

/ip/route/remove

Mandatory Parameters

--ID

Screen Output

Table 7-252: “remove” command information

/cli/ip/route> remove ?

Usage REMOVE:

REMOVE Remove

--ID Identifies a table entry by ID, in this context.

Figure 7-283: CLI on line help on “remove” command usage in this node context

7.6.11.5.3 “show” command

This command displays general information on the system configuration, indicating the interfaces available in the system for Inband configuration

and showing current InBand configuration.

Name

show

Description

Show the current configuration.

Full path

/ip/route/show

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-285. Table parameters description in Table 7-254

Table 7-253: “show” command information

/cli/ip/route> show ?

Usage:

SHOW Show the current configuration

Figure 7-285: CLI on line help on “show” command usage in this node context

Figure 7-286: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands