Televes OLT 769401 User Manual Download Page 219

Page: 219 / 482

219

Figure 7-79: Output of ”show” command in this node context

Parameter

Description

Global NTP state

Current Global NTP server state (enabled|disabled)

Current NTP server ID

Admin

Current administrative state

Name

Current NTP server name

Current NTP server IP address (IPv4 address)

Table 7-59: “show” command output table parameters

7.6.2.4.1.7 “showconfig” command

Name

showconfig

Description

Prints the command list that enforces the current configuration

Full path

/applications/time/ntp/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-60: “showconfig” command information

/cli/applications> time/ntp/showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-80: CLI on line help on “showconfig” command usage in this node context

7.6.2.4.2 “time-zone” sub-node

This sub-node allows the configuration of the system time and the time zones.

7.6.2.4.2.1 “availableValues” command

Name

availableValues

Description

Displays all supported Time Zones and respective IDs.

Full path

/applications/time/time-zone/availableValues

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7- . Table parameters described in Table 7-

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands