Televes OLT 769401, User Manual

Page: 175 / 482

EN
175
7. CLI
7.1 System Management
The OLT equipment can be managed locally either using a web browser; via Web Ti application, described in section 5.1 System Management of
this Users’ Guide, or using a Linux based Command Line Interface, CLI, described in this Chapter. Both WebTi and CLI provide the system with Local
Craft Terminal (LCT) functionalities.
There are two different ways to manage the equipment, (for more details on how to connect the OLT system for management please refer to
section 5.1 System Management, in this User’s Guide):
Connect to the management port ETH, (G1 or G2), either locally by connecting directly to the PC Ethernet port, or remotely,
via service provider DCN;
Inband Management using a configured management VLAN which interconnects MPLS network to DCN.
7.2 Access to the Equipment
Any OLT equipment comes with an integrated Command Line Interface (CLI) for system management and configuration.
In order use the CLI OLT interface, the OLT equipment must accessed via Telnet or SSH protocols, using the console port (RS232).
An SSH/telnet client application, as for example PuTTY, which is an open source software SSH and telnet client, developed originally for the
Windows platform, can be used for accessing the OLT system.
At the client application configuration window, Figure 7-, open a session at the OLT equipment you want to access:
Typing the OLT IP address to access, 1;
Selecting connection type (Telnet or SSH), 2;
Pressing Open, 3
A session will be opened and a login prompt at the OLT equipment presented to the user, Figure 7-1.
1
2
3
Figure 7-1: Accessing to the OLT equipment via SSH