Televes OLT 769401, User Manual

Page: 246 / 482

Descripción del producto
246
/cli/erp-ring> create ?
Usage CREATE:
CREATE Create a new Ethernet Ring Protection (ERP) instance.
[OPTIONAL]
--ID Identifies a table entry by ID, in this context.
--add-vlan Add one Protected vlan entry to the list (1..4094)
--admin Administrative State. Enable/disable, in this
context. (enable|disable)
--aps-ch-vlan Set the APS channel VLAN (1..4094)
--aps-meg-level Set APS channel MEG level value (0..7) min
--del-vlan Delete one Protected vlan entry from the list
(1..4094)
--guard-time Set the guard time (1..200) x10ms
--holdoff-time Set the hold off time, in hundreds of milliseconds
(0..100) x100ms
--open-ring Specify whether the ring is open or not.
(enable|disable)
--p0-cfm-probe-id Identify a CFM probe by ID (0 for none)
--p0-port Identify a Port (e.g.: eth.1, pon.3, lag.2)
--p0-slot Identify a Slot (not used for LAG)
--p0-type Set the port type (non-rpl|rpl|rpl-neighbor)
--p1-cfm-probe-id Identify a CFM probe by ID (0 for none)
--p1-port Identify a Port (e.g.: eth.1, pon.3, lag.2)
--p1-slot Identify a Slot (not used for LAG)
--p1-type Set the port type (non-rpl|rpl|rpl-neighbor)
--revertive Specify is reversion is enabled. (enable|disable)
--ring-id Set the ring ID
--wtr Set the Wait to Restore time (1..12) x10ms
Figure 7-142: CLI on line help on “create” command usage in this node context
7.6.7.3 “remove” command
Name remove
Description
Remove an existing ERP instance.
Full path /erp-ring/remove
Mandatory Parameters --ID
Screen Output
No
Table 7-118: “remove” command information
/cli/erp-ring> remove ?
Usage:
REMOVE Remove an existing ERP instance.
<MANDATORY>
--ID Identifies a table entry by ID, in this context.
Figure 7-143: CLI on line help on “remove” command usage in this node context
7.6.7.4 “show” command
Name
show
Description
Show the summary configuration for all ERP instances. Specify an ID to see
details.