Televes OLT 769401 User Manual Download Page 374

Page: 374 / 482

Descripción del producto

374

Flow Control

Indicates if flow control (

transmission and processing of Pause Frames

) is

enabled or disabled

Loop

Indicates if port loop is used

Table 7-381: “show” command output table parameters

7.6.17.6.5.3 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/cli/remote-eq/onu/ethernet/showconfig

Mandatory Parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-382: “showconfig” command information

cli/remote-eq/onu/ethernet> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-422: CLI on line help on “showconfig” command usage in this node contex

7.6.17.6.6 “ext-vlan-tag-op” sub-node

7.6.17.6.6.1 “config” command

Name

config

Description

Configure the Extended VLAN Tagging Operation Global Attributes

Full path

/remote-eq/onu/ext-vlan-tag-op/config

Mandatory Parameters

--onu-port

Screen Output

Table 7-383: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands