Televes OLT 769401 User Manual Download Page 381

Page: 381 / 482

381

/cli/remote-eq/onu/ptp-source> config ?

Usage:

CONFIG Configure one ONU PTP source instance parameters.

--olt-ptp-port-ID Identify one OLT PTP port instance by ID.

[OPTIONAL]

--add-onu-port

Attach an ONU interface to an ONU service. See available values by

executing the command ‘availableValues’.

--admin

Administrative State. Enable/disable, in this context.

(enable|disable)

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--uni-ctag

VLAN ID delivered/received from the (Ethernet) subscriber-facing

interface at the ONU. (1..4094)

Figure 7-434: CLI on line help on “config” command usage in this node context

7.6.17.6.7.3 “create” command

Name

create

Description

Create a new PTP source instance on a given ONU, and associate it with an

existing OLT PTP port.

Full path

/remote-eq/onu/ptp-source/create

Mandatory Parameters

--olt-ptp-port-ID

Screen Output

Table 7-395: “create” command information

/cli/remote-eq/onu/ptp-source> create ?

Usage:

CREATE Create a new PTP source instance on a given ONU, and associate it

with an existing OLT PTP port.

--olt-ptp-port-ID Identify one OLT PTP port instance by ID.

[OPTIONAL]

--add-onu-port

Attach an ONU interface to an ONU service. See available values by

executing the command ‘availableValues’.

--admin

Administrative State. Enable/disable, in this context.

(enable|disable)

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--uni-ctag

VLAN ID delivered/received from the (Ethernet) subscriber-facing

interface

at the ONU. (1..4094)

Figure 7-435: CLI on line help on “create” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands