Televes OLT 769401 User Manual Download Page 227

Page: 227 / 482

227

/cli/cfm-probe> create ?

Usage:

CREATE Create a new CFM probe.

--mep

Specify MEP Id

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

[OPTIONAL]

--admin

Administrative State. Enable/disable, in this context.

enable|disable)

--icc-umc

Specify the concatenated ICC and UMC fields of the MEG ID

according to ITU-T Y.1731

--level

Specify level (only 7 allowed)

--md-format Specify the MD Name Format (no-md|dns-based|mac+integer|string)

--md-name

Specify the Maintenance Domain (MD) Name according to IEEE

802.1ag

--rmep

Specify RMEP Id

--sma-format Specify the Short MA Name Format (primary-

vid|string|integer|rfc2685-vpn-id)

--sma-name

Specify the short MA Name according to IEEE 802.1ag

--transmission-period Specify the transmission period (10ms|100ms|1s|10s|1min|10min)

--vlan

Choose a VLAN ID.

Figure 7-97: CLI on line help on “create” command usage in this node context

7.6.4.3 “remove” command

Name

remove

Description

Remove an existing CFM probe.

Full path

/cfm-probe/remove

Mandatory Parameters

--ID

Screen Output

Table 7-77: “remove” command information

/cli/cfm-probe> remove ?

Usage:

REMOVE Remove an existing CFM probe.

--ID

Identifies a table entry by ID, in this context.

Figure 7-98: CLI on line help on “remove” command usage in this node context

7.6.4.4 “show” command

Name

show

Description

Show the current CFM probe configuration

Full path

/cfm-probe/show

Mandatory Parameters

Screen Output

Tables ,Figure 7- and Figure 7-; tables’ parameters description in Table 7-.

Table 7-78: “show” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands