Televes OLT 769401 User Manual Download Page 332

Page: 332 / 482

Descripción del producto

332

/cli/ multicast/igmp/querier> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-330: CLI on line help on “showconfig” command usage in this node context

7.6.15.4 “probes” sub-node

7.6.15.4.1 ”config” command

Name

config

Description

Modify parameters for an existing probe.

Full path

/multicast/probes/config

Mandatory Parameters

--ID

Screen Output

Table 7-295: “config” command information

/cli/multicast/probes> config ?

Usage:

CONFIG Modify parameters for an existing probe.

--ID

Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin

Administrative State. Enable/disable, in this context. (enable|disable)

--ip-mcast

IPv4 multicast address

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--serviceID

Select an OLT service by ID.

Figure 7-331: CLI on line help on “config” command usage in this node context

7.6.15.4.2 ”create” command

Name

create

Description

Create a Probe for a multicast service uplink interface

Full path

/ multicast/probes/create

Mandatory Parameters

--ip-mcast
--port
--serviceID

Screen Output

Table 7-296: “create” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands