Televes OLT 769401 User Manual Download Page 305

Page: 305 / 482

305

/cli/ip> apply ?

Usage:

APPLY Will apply to the HW the last saved IP configuration.

Figure 7-267: CLI on line help on “apply” command usage in this node context

7.6.11.2 “save” command

Name

save

Description

Save the current IP+configuration to the system startup configuration.

Full path

/ip/save

Mandatory Parameters

This command has no parameters.

Screen Output

Table 7-239: “save” command information

/cli/ip> save ?

Usage:

SAVE Save the current IP configuration to the system startup configuration.

Figure 7-268: CLI on line help on “save” command usage in this node context

7.6.11.3 “interfaces” sub-node

7.6.11.3.1 “inband” sub-node

7.6.11.3.1.1 “config” command

Name

config

Description

Configure an Inband interface.

Full path

/ip/interfaces/inband/config

Mandatory Parameters

--port
--set-InBand

Screen Output

Table 7-240: “config” command information

/cli/ip/interfaces/inband> config ?

Usage:

CONFIG Configure

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--set-InBand

Set the given interface for inBand mgmt or not. (true/false)

Figure 7-269: CLI on line help on “config” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands