Televes OLT 769401 User Manual Download Page 17

Page: 17 / 482

2.2 OLT System Features

Ethernet features:

VLAN Switching;

Multicast – IGMP Snooping/Proxy;

Load Balancing and LACP;

DHCP Relay Agent;

QoS.

Interworking between the Ethernet and GPON packets

ONT management via OMCI, the main features being:

Downstream/Upstream bit rate: 2.488/1.244 Gbps;

Advanced Encryption Standard (AES);

Forward Error Correction (FEC);

Up to 64 ONT per PON; (1:128 splitting ratio is hardware ready)

L2 Manipulation: Transparent, Add/change S-Tag e C-Tag;

Dynamic Bandwidth Allocation (DBA).

In parallel with the data services, the OLT System allows the transport of analog video services (RF Overlay).

2.3 Services

The following services’ related features are supported by the OLT:

Up to 255 network services

Up to 10 Client services per ONT.

Up to 447 Client services per PON in VLAN+P-bit mode (8GEM per service)

Up to 3582 Client services per PON in VLAN mode (1 GEM per service)

Up to 1K policers for:

Unicast an dor Bitstream Stacked

MAC Brigde Mac addresses

User isolation

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands