Televes OLT 769401 User Manual Download Page 430

Page: 430 / 482

Descripción del producto

430

Parameter

Description

Admin

Service Administrative State

Type

Identifies the type of service:

Unicast

: Bidirectional service, where each frame has only one final destination.

These services are used in Residential applications, where some kinds of packets

can be trapped and processed (ex. DHCP, IGMP). In case of Unstacked Services,

MAC Learning is performed.

Multicast

: Unidirectional Service, where one frame can be delivered to several

destinations. These destinations are controlled by IGMP Snooping/Proxy.

UniVoIP

: Bidirectional Service, where each frame has only one final destination.

Similar to Unicast Services, with the difference that when it’s configured to the

ONU, VoIP configurations are downloaded to the ONU.

Bitstream

: Bidirectional Service, where each frame has only one final destination.

These services are used in Business applications, where all packets pass

transparently by the system and MAC learning is disabled.

Stacked

Provides the frame format in the uplink interface. If it’s Stacked the frame contains

two vlan tags, if it’s Unstacked the frame contains only one vlan tag. Both vlans

have Ethertype=0x8100.

Mult. Flood

Multicast flooding. (enable|disable)

DHCP

Identifies if the service must work has a DHCP Relay Agent.

PPPoE

Enable or disable PPPoE for a given service. (enable|disable)

IGMP

Enable or disable IGMP for a given service. (enable|disable)

NNI S-TAG

Identifies the outer tag of the service on the network-facing (Ethernet) interface

in the uplink port (1..4094)

UNI C-TAG

Identifies the VLAN delivered/received to/from the (Ethernet) subscriber-facing

interface at the ONU. (1..4094) After this VLAN can be translated in the ONU.

Uplink Interfaces

Uplink Slot/port pair (NNI)

Downlink Interfaces

Slot/Port (PON) pair (UNI).Identifies the GPON port(s) associated to the Service

Table 7-495: Show command, used with serviceId parameter, output table parameters

7.6.19.6 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/services/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the

current configuration.

Table 7-496: “showconfig” command information

/cli/services> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-533: CLI on line help on “showconfig” command usage in this node context

7.6.19.7 “rate-limiters” sub-node

7.6.19.7.1 “config” command

Name

config

Description

Configure the global rate limiters.

Full path

/services/rate-limiters/config

Mandatory Parameters

No mandatory parameters

Screen Output

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands