Televes OLT 769401, User Manual

Page: 368 / 482

Descripción del producto
368
Figure 7-408: “show” command error message
Name show
Description Show the current configuration
Full path /remote-eq/onu/analog-rf/show
Mandatory Parameters
No
Screen Output
Table, Figure 7-410. Table parameters description in Table 7-371.
Table 7-370: “show” command information
/cli/remote-eq/onu/analog-rf> show ?
Usage:
SHOW Show the current configuration
[OPTIONAL]
--onuID Identifies an ONU by ID, in this context.
--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)
Figure 7-409: CLI on line help on “show” command usage in this node context
Figure 7-410: Output of ”show” command in this node context
Parameter Description
ID Identifies analog RF interface by ID
Port Identifies analog RF interface by name
Admin Indicates analog RF interface administrative state
Filter Indicates type of channel filter used (how many filtered channels)
Table 7-371: “show” command - output table parameters
7.6.17.6.3.3 “showconfig” command
Name showconfig
Description
Print the command list that enforces the current configuration
Full path
/remote-eq/onu/analog-rf/showconfig
Mandatory Parameters No
Screen Output
Full command(s) path and used arguments and values to reach the current
configuration.
Table 7-372: “showconfig” command information