Televes OLT 769401 User Manual Download Page 320

Page: 320 / 482

Descripción del producto

320

Figure 7-306: Output of ”show” command in this node context

Parameter

Description

Slot

Indicates the Slot

Port

Indicates the Port

ONT ID

Indicates the ONU identifier

(ID) OLT Service

Indicates the service identifier (ID) and name

MAC

Indicates the learned MAC address

Table 7-271: “show” command output table parameters

7.6.14.4.2 “switch” sub–node

7.6.14.4.2.1 ”remove” command

Name

remove

Description

Remove one Switch MAC entry from the Table. All parameters are mandatory

except when shown “--”.

Full path

/mac-table/status/switch/remove

Mandatory Parameters

--mac

Screen Output

Table 7-272: “remove” command information

/cli/mac-table/status> switch/remove ?

Usage REMOVE:

REMOVE Remove one Switch MAC entry from the Table. All parameters are

mandatory except when shown “--”.

--mac Identify/Set a MAC entry, in this context.

[OPTIONAL]

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--serviceID Select an OLT service by ID.

--vlan Choose a VLAN ID.

Figure 7-307: CLI on line help on “remove” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands