Televes OLT 769401, User Manual

Page: 264 / 482

Descripción del producto
264
Parameter Description
Table Title Card #(slot number) –name of the card inserted in that slot
Port Ethernet port identification in the board
CoS Class of Service identification (Number 1..8)
PCPs p-bit associated to the Class of Service (0..8) marked X
(ID) Ethernet Profile Profile ID (number) Ethernet Profile Name
Scheduler Scheduler policy (strict|weighted)
Table 7-152:”show” command without arguments output table parameters
7.6.10.1.4.3 “showconfig” command
Name showconfig
Description
Print the command list that enforces the current configuration
Full path
/interfaces/Ethernet/cos/showconfig
Mandatory Parameters This command has no parameters
Screen Output
Full command(s) path and used arguments and values to reach the current
configuration.
Table 7-153: “showconfig” command information
7.6.10.1.5 dhcp” sub-node
7.6.10.1.5.1 “config” command
Name
config
Description Configure DHCP mode parameter for the given interfaces.
Full path
/interfaces/ethernet/dhcp/config
Mandatory Parameters
--port
--slot
Screen Output
No
Table 7-154: “config” command information
/cli/interfaces/ethernet/dhcp> config ?
Usage CONFIG:
CONFIG Configure DHCP mode parameter for the given interfaces.
<MANDATORY>
--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)
--slot Identifies a slot.
[OPTIONAL]
--is-trusted Set the DHCP mode {default: untrusted / mode: 0 - untrusted, 1
- trusted}
Figure 7-181: CLI on line help on “config” command usage in this node context