Televes OLT 769401, User Manual

Page: 188 / 482

Descripción del producto
188
7.5 CLI Tree
This section of the manual describes all the existing commands and respective arguments. It briefly explains the purpose of each
command and, when appropriate, explains how to use the command.
This section numbering matches the CLI nodes tree for an easy navigation in the document.
The complete CLI structure is depicted in the text box below. The nodes are in bold and the commands within the nodes are preceded
by the “@” symbol. The gray nodes and commands represent features that are not applicable to this equipment configuration. On
the right side of the box there are links to the CLI description sub-section where the node or sub-node and commands detailed
description can be found
.
/cli> tree
+ cli[@cd, @clear, @dir, @help, @mem, @quit, @show, @showconfig, @tree]
+ acl[@config, @create, @remove, @show, @showconfig]
+ interface[@add, @config, @remove]
+ network-service[@add, @config, @remove]
+ rule[@config, @remove]
+ rule-ipv4-ext[@config, @create, @show]
+ rule-ipv4-std[@config, @create, @show]
+ rule-ipv6-ext[@config, @create, @show]
+ rule-mac[@config, @create, @show]
+ applications[]
+ firmware-upgrade[]
+ files[@check, @config, @export, @import, @remove, @show, @status]
+ onu-upgrade[@apply-file, @availableValues, @execute]
+ manager[@config, @show]
+ olt-upgrade[@apply-file, @import]
+ time[]
+ ntp[@config, @create, @disable, @enable, @remove, @show, @showconfig]
+ time-zone[@availableValues, @config, @show, @showconfig]
+ backup-manager[@create, @del-serv-conf, @export, @import, @remove, @restore, @show]
+ cfm-probe[@config, @create, @remove, @show, @showconfig, @status]
+ unx-ccm[@remove, @show]
+ dhcp[]
+ dhcp-services[@config, @show, @showconfig]
+ global[@config, @show, @showconfig]
+ leases[@show]
+ equipment[@status]
+ boards[@config, @show, @showconfig]
+ slot[@apply, @config, @show, @showconfig]
+ switch-fabric[@show, @switch, @update, @upgrade-sw]
+ system[@config, @show, @showconfig]
+ erp-ring[@config, @create, @remove, @show, @showconfig]
+ status[@command, @show]
+ aps-channel[@show]
+ eth-protection[@command, @config, @create, @remove, @show, @showconfig, @status]
+ gpon-protection[@command, @config, @create, @remove, @show, @showconfig, @status]
+ interfaces[]
+ analog-rf[@config, @show, @showconfig]
+ status[@show]
+ ethernet[@config, @show, @showconfig]
+ cos[@config, @show, @showconfig]
+ services[@add, @availableValues, @config, @remove, @show]
+ statistics[]
+ counters[@availableValues, @show, @show-active, @start, @stop]
+ dhcp[@show]
+ igmp[@show]
+ statistics[@show]
+ status[@show]
+ SFPs[@show]
+ gpon[@config, @show, @showconfig]
+ cos[@config, @show, @showconfig]
+ statistics[]
+ errors[@show]
+ ethernet[@show]
+ gpon[@show]
+ status[@show]
+ SFPs[@show]
+ rx-power[@read-all, @show]