Televes OLT 769401 User Manual Download Page 101

Page: 101 / 482

101

5.2.4.14.3 Protection Schemes :: ETH Port

The selection of Protection Schemes Sub-menu item ETH Port opens an Ethernet Protection Configuration window, Figure 5-62.

In CLI Ethernet Protection related commands including configuration are described in section 7.6.8 “eth-protection” nodeand subsections.

Figure 5-62: Ethernet Protection configuration window

Parameter

Description

Group

Ethernet Protection group identifier

Admin

Ethernet Protection group administrative state

Working

Ethernet working interface

Protection

Ethernet protection interface

Reversibility

Flag. If selected indicates that the system will switch back to the working

interface after a predefined period of time on the protection state following

a switch over

Wait to restore time (Min)

Time, in minutes, on the protection state after a switch over, before switching

back to the working state, in the case Reversibility is configured.

Holdoff time (x100ms)

Time, in multiples of 100ms, after an alarm occurs, on the working state before

switching over to the protection state.

Details

By pressing view it will appear a window with the Ethernet Protection Group

configuration details, Figure 5-63

Table 5-48: Ethernet Protection window parameters

Figure 5-63: Ethernet protection Group Configuration details Dialog Box

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands