Televes OLT 769401 User Manual Download Page 235

Page: 235 / 482

235

/cli/dhcp/global> showconfig ?

Usage SHOWCONFIG:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-116: CLI on line help on “showconfig” command usage in this node context

7.6.5.4 “leases” sub-node

7.6.5.4.1 “remove” command

Name

remove

Description

Remove DHCP leases from the Table

Full path

/dhcp/leases/remove

Mandatory Parameters

--mac
--port
--serviceID

Screen Output

Table 7-94: “remove” command information

/cli/dhcp/leases> remove ?

Usage REMOVE:

REMOVE Remove DHCP leases from the Table.

--mac Identify/Set a MAC entry, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--serviceID Select an OLT service by ID.

Figure 7-117: CLI on line help on “remove” command usage in this node context

7.6.5.4.2 “show” command

Name

show

Description

Show DHCP leases information.

Full path

/dhcp/leases/show

Mandatory Parameters

Screen Output

Table Figure 7-119.Table parameter description in Table 7-96

Table 7-95: “show” command information

/cli/dhcp/leases> show ?

Usage:

SHOW Show DHCP leases information.

Figure 7-118: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands