Televes OLT 769401 User Manual Download Page 352

Page: 352 / 482

Descripción del producto

352

/cli/profiles/voip/server> create ?

Usage CREATE:

CREATE Create a new VoIP srver profile.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--gw-ip IPv4 address for the default GW

--name Define a name for this profile. (STRING 15)

--server-ip IPv4 address for the VoIP server

--server-port The VoIP server port

--voice-gw The Voice Gateway to choose. (see ‘availableValues’) (1..5)

Figure 7-374: CLI on line help on “create” command usage in this node context

7.6.16.6.1.4 “remove” command

Name

remove

Description

Remove a voip server profile

Full path

/ profiles/voip/server/remove

Mandatory Parameters

--profileID

Screen Output

Table 7-338: “remove” command information

/cli/profiles/voip/server> remove ?

Usage:

REMOVE Remove an existing profile

--profileID

Identifies a profile by ID.

Figure 7-375: CLI on line help on “remove” command usage in this node context

7.6.16.6.1.5 “show” command

Name

show

Description

Show the current configuration.

Full path

/profiles/voip/server/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-377. Table parameters description, Table 7-340.

Table 7-339: “show” command information

/cli/profiles/voip/server> show ?

Usage:

SHOW Show the current configuration.

Figure 7-376: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands