Televes OLT 769401 User Manual Download Page 324

Page: 324 / 482

Descripción del producto

324

/cli/multicast/group-list> create ?

Usage CREATE:

CREATE Create a new multicast group

--ip-address IPv4 address

--name Set a name for the specified multicast group. (STRING 31)

--serviceID Select an OLT service by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--bandwidth Specify the multicast group bandwidth in units of Kbps

--group-mask Group IPv4 address mask (0 | 22..32)

--src-ipv4-addr Specify the source IPv4 address or ‘any’ to specify any IP

--static-group Configure the multicast group as dynamic(default) or as static

Figure 7-314: CLI on line help on “create” command usage in this node context

7.6.15.2.3 ”remove” command

Name

remove

Description

Remove an existing multicast group

Full path

/multicast/group-list/remove

Mandatory Parameters

--ID

Screen Output

Table 7-279: “remove” command information

/cli/multicast/group-list> remove ?

Usage:

REMOVE Remove an existing multicast group

--ID

Identifies a table entry by ID, in this context.

Figure 7-315: CLI on line help on “remove” command usage in this node context

7.6.15.2.4 ”show” command

Name

show

Description

Show the current configured multicast groups

Full path

/multicast/group-list/show

Mandatory Parameters

This command has no parameters

Screen Output

Tables Figure 7-317.Tables parameter description Table 7-281

Table 7-280: “show” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands