Televes OLT 769401 User Manual Download Page 307

Page: 307 / 482

307

/cli//ip/interfaces/inband > showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-272: CLI on line help on “showconfig” command usage in this node context

7.6.11.3.2 “ip” sub-node

7.6.11.3.2.1 “config” command

This command configures the ethernet and inBand management interfaces

Name

config

Description

Configure the ethernet and inBand management interfaces

Full path

/ip/interfaces/ip/config

Mandatory Parameters

--ID

Screen Output

Figure 7-273: “config” command information

/cli/ip/interfaces/ip> config ?

Usage:

CONFIG Configure

--ID

Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin

Administrative State. Enable/disable, in this context. (enable|disable)

--ip-address IPv4 address

--mask-bits IPv4 Subnet Mask bits (0..32)

--vlan

Choose a VLAN ID.

Figure 7-274: CLI on line help on “config” command usage in this node context

7.6.11.3.2.2 “show” command

This command displays general information on the system configuration, indicating the interfaces available in the system for inBand configuration

and showing current InBand configuration.

Name

show

Description

Show the current configuration.

Full path

/ip/interfaces/ip/show

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-276. Table parameters description in Table 7-245

Table 7-244: “show” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands