Televes OLT 769401 User Manual Download Page 342

Page: 342 / 482

Descripción del producto

342

7.6.16.3 “ONUs” sub-node

This node is used to configure, create and remove profiles for remote ONUs.

7.6.16.3.1 “config” command

Name

config

Description

Configure ONU profiles.

Full path

/profiles/onu/config

Mandatory Parameters

--profileID

Screen Output

Table 7-316: “config” command information

/cli/profiles/onu> config ?

Usage CONFIG:

CONFIG Configure an existing ONU profile.

--profileID Identifies a profile by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--model Define the Model Name (STRING 47)

--name Define a name for this profile. (STRING 47)

--port-num The number of ports for a given port type (max: 4 ETH , 1 PON , 1

RF , 2 VoIP, 4 E1, 1 VEIP )

--port-type The type of a port (eth|pon|voip|rf|e1|veip)

--vendor Define the Vendor Name (STRING 15)

Figure 7-353: CLI on line help on “config” command usage in this node context

7.6.16.3.2 “create” command

Name

create

Description

Create a new ONU profile

Full path

/profiles/onu/create

Mandatory Parameters

Screen Output

Table 7-317: “create” command parameters

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands