Televes OLT 769401, User Manual

Page: 83 / 482

EN
83
UNI C-TAG
Identifies the VLAN delivered/received to/from the ONU. After this VLAN can be translated in the
ONU.
DHCP
Identifies if the service must work has a DHCP Relay Agent.
Details
By pressing view it will appear a window with the service configuration details where depending on
the service it’s possible to change some of the parameters, and the ports associated with the service.
Table 5-23: Services Configuration parameters
Figure 5-36 : Service Configuration details
Parameter Description
Name
Name that identifies the Service
Admin Service Administrative State
PPPoE
Enable or disable PPPoE for a given service. (enable|disable)
Mult. Flood Multicast flooding. (enable|disable)
Type
Identifies the type of service:
Unicast : Bidirectional service, where each frame has only one final destination. These services are
used in Residential applications, where some kinds of packets can be trapped and processed (ex.
DHCP, IGMP). In case of Unstacked Services, MAC Learning is preformed.
Multicast
: Unidirectional Service, where one frame can be delivered to several destinations. These
destinations are controlled by IGMP Snooping/Proxy.
UniVoIP : Bidirectional Service, where each frame has only one final destination. Similar to
Unicast Services, with the difference that when it’s configured to the ONU, VoIP configurations are
downloaded to the ONT.
Bitstream
: Bidirectional Service, where each frame has only one final destination. These services are
used in Business applications, where all packets pass transparently by the system and MAC learning
is disabled.
Mac Bridge: In this type of service forwarding is based on S-VID+DMAC or S-VID+C-VID+DMAC.
Unicast Unknown, Multicast and Broadcast MAC Addresses are replicated to all the GEM Ports that
belong to the same S-VID or S-VID+C-VID.
IGMP
Enable or disable IGMP for a given service. (enable|disable)
Stacked
Provides the frame format in the uplink interface. If it’s Stacked the frame contains two vlan tags, if it’s
Unstacked the frame contains only one vlan tag. Both vlans have Ethertype=0x8100.
DHCP
Identifies if the service must work has a DHCP Relay Agent.
Slot/LAG
Uplink used Slot (card)/LAG (NNI)
Port Uplink used port NNI)
NNI S-TAG
Identifies the outer tag of the service on the network-facing (Ethernet) interface in the uplink port
(1..4094)
Slot/Port Slot/Port (PON) pair (UNI).Identifies the GPON port(s) associated to the Service
UNI C-TAG
Identifies the VLAN delivered/received to/from the (Ethernet) subscriber-facing interface at the ONU.
(1..4094) After this VLAN can be translated in the ONU.
Table 5-24: Services Configuration details: parameters
New services can be added through the “Add” button, Figure 5-37. For service configuration parameters description refer to Table