Televes OLT 769401, User Manual

Page: 284 / 482

Descripción del producto
284
7.6.10.2.3 “showconfig” command
Name showconfig
Description Print the command list that enforces the current configuration
Full path
/cli/interfaces/gpon/showconfig
Mandatory Parameters
This command has no parameters
Screen Output
Full command(s) path and used arguments and values to reach the current
configuration.
Table 7-195: “showconfig” command information
/cli/interfaces/gpon> showconfig ?
Usage:
SHOWCONFIG Print the command list that enforces the current configuration
Figure 7-221: CLI on line help on “showconfig” command usage in this node context
7.6.10.2.4 “cos” sub-node
This sub-node is used to manage CoS configuration of PON interfaces in all slots.
7.6.10.2.4.1 “config” command
Name
config
Description
Configure CoS information for PON interfaces.
Full path
/interfaces/gpon/cos/config
Mandatory Parameters
--cos
--port
Screen Output
No
Table 7-196: “config” command information
/cli/interfaces/gpon/cos> config ?
Usage:
CONFIG Configure CoS information for PON interfaces.
<MANDATORY>
--cos Identifies a Class of Service (1..8)
--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)
[OPTIONAL]
--pcp-bits Identifies the p-bits associated to the Class of Service. (0..7)
--profileID Identifies a profile by ID.
--scheduler Identifies the type of Scheduler (strict|weighted)
Figure 7-:222 CLI on line help on “config” command usage in this node context
7.6.10.2.4.2 “show” command
Name
show
Description Show the current CoS configuration.