Televes OLT 769401, User Manual

Page: 57 / 482

EN
57
To manage the OLT equipments by the Inband interface, there must be a management VLAN configured which interconnects MPLS network to
the DCN.
5.1.1 System Requirements
To configure and check the state of the system with Web TI is necessary to use a Web browser, WebTi is compatible with Internet Explorer 6/7/8/9.
To configure the system with CLI is necessary to use a CMD window.
5.1.2 Configuring the Web Browser
This set of procedures described in this section must be followed in order to use WebTI application.
In the remaining subsections of sections 5 C and 6 O use of WEB TI application will be assumed and described.
References to the use of CLI for configuration and operation will be provided along the text to the appropriate subsection of 7 CLI., where a
detailed description of OLT equipment CLI usage is provided.
Despite the compatibility with IE8 and IE9, compatibility view mode must be made with this browsers, this option can be made near the place
where the equipment’s IP address is configured.
Generally in new browsers it may appear a button next to the URL called Compatibility View . This button should be activated because it
allows browser compatibility with Web Sites designed for older browsers since menus, images, or misaligned text will be corrected.
Updating configuration dialogs or status will only occur in the opening or, if required, pressing the IE refresh button or
buttons in the various windows. If in doubt delete temporary files as described below.
5.1.3 Cleaning the Cookies and Temporary Files
For the correct operation with WebTi it is necessary to clean up the cookies and the temporary files. In the Internet Explorer options, in the General
tab the user must click in Delete.
In the Delete Browsing History Window the user must click in the option “Delete all…”.
Figure 5-3: Internet Explorer Configuration