Televes OLT 769401 User Manual Download Page 271

Page: 271 / 482

271

7.6.10.1.7.6 “showconfig” command

Name

showconfig

Description

Prints the command list that enforces the current configuration.

Full path

/interfaces/ethernet/services/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-169: “showconfig” command information

/cli/interfaces/ethernet/services> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-194: CLI on line help on “showconfig” command usage in this node context

7.6.10.1.7.7 “showconfig” command

Name

showconfig

Description

Prints the command list that enforces the current configuration.

Full path

/interfaces/ethernet/services/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-170: “showconfig” command information

/cli/interfaces/ethernet/services> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-195: CLI on line help on “showconfig” command usage in this node context

7.6.10.1.7.8 “statistics” sub-node

This node is used to view the traffic statistics on a specified Ethernet interfaces in a specified slot.

7.6.10.1.7.8.1 “counters” sub-node

7.6.10.1.7.8.1.1 “availableValues” command

Name

availableValues

Description

Display all client services where counters can be activated

Full path

/interfaces/ethernet/services/statistics/counters/availableValues

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-197. Table parameters description inTable 7-172.

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands