Televes OLT 769401 User Manual Download Page 319

Page: 319 / 482

319

7.6.14.4 “status” sub-node

7.6.14.4.1 “gpon” sub-node

7.6.14.4.1.1 “remove” command

Name

remove

Description

Remove one GPON MAC entry from the Table.

Full path

/mac-table/status/gpon/remove

Mandatory Parameters

--mac
--onuID
--port
--serviceID

Screen Output

Table 7-269: “remove” command information

REMOVE Remove one GPON MAC entry from the Table.

--mac Identify/Set a MAC entry, in this context.

--onuID Identifies an ONU by ID, in this context.

--port the value from column ‘Port’ from the show table. (e.g.: pon.2;

eth.3; lag.1, SF)

--serviceID Select an OLT service by ID.

Figure 7-304: CLI on line help on “remove” command usage in this node context

7.6.14.4.1.2 “show” command

Name

Show

Description

Show the GPON MAC Table.

Full path

/mac-table/status/gpon/show

Mandatory Parameters

Screen Output

Table Figure 7-306. Table parameters description in Table 7-271

Table 7-270: “show” command information

/cli/mac-table/status/gpon> show ?

Usage:

SHOW Show the GPON MAC Table.

[OPTIONAL]

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-305: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands