Televes OLT 769401 User Manual Download Page 196

Page: 196 / 482

Descripción del producto

196

7.6.1.7.3 “remove” command

Name

remove

Description

Remove an existing Network Service association.

Full path

/acl/network-service/remove

Mandatory Parameters

--acl-id
--serviceID

Screen Output

Table 7-16: “remove” command information

/cli/acl> network-service/remove ?

Usage REMOVE:

REMOVE Remove an existing Network Service association

--acl-id Identifies an ACL by ID, in this context.

--serviceID Select an OLT service by ID.

Figure 7-34: CLI on line help on “remove” command usage in this node context

7.6.1.8 “rule” sub-node

7.6.1.8.1 “config” command

Name

config

Description

Configure any shared rule parameters

Full path

/acl/rule/config

Mandatory Parameters

--acl-id
--rule-id

Screen Output

Table 7-17: “config” command information

/cli/acl/rule> config ?

Usage:

CONFIG Configure any shared rule parameters

--acl-id Identifies an ACL by ID, in this context.

--rule-id Identifies an ACL Rule by ID, in this context.

[OPTIONAL]

--action permit or deny

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--name Set a name for a specific Rule (STRING 31)

Figure 7-35: CLI on line help on “config” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands