Televes OLT 769401 User Manual Download Page 315

Page: 315 / 482

315

7.6.12.5 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/ip-source-guard/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-261: “showconfig” command information

/cli//ip-source-guard> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-293: CLI on line help on “showconfig” command usage in this node context

7.6.13 “logs” node

This node is used to view logs for all the system events.

/cli/logs> tree

+ logs[]

+ alarms[@clear, @show]

Figure 7-294: Logs node tree

7.6.13.1 “alarms” sub-node

7.6.13.1.1 “clear” command

Name

clear

Description

Clear all alarms for a given slot or all alarms for all slots.

Full path

/ip/logs/alarms/clear

Mandatory Parameters

Screen Output

Table 7-262: “clear” command information

/cli/logs/alarms> clear ?

Usage:

CLEAR Clear all alarms for a given slot or all alarms for all slots.

Figure 7-295: CLI on line help on “clear” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands