Televes OLT 769401 User Manual Download Page 362

Page: 362 / 482

Descripción del producto

362

7.6.17.5.6 “insert-all” command

Name

insert

Description

Start managing all ONUs (in ‘NEW’ state) on a given Slot, or interface. Default

values will be used for all parameters.

Full path

/remote-eq/discovery/ insert-all

Mandatory Parameters

Screen Output

Table 7-358: “insert-all” command information

/cli/remote-eq/discovery> insert-all ?

Usage INSERT-ALL:

INSERT-ALL Start managing all ONUs (in ‘NEW’ state) on a given Slot, or

interface. Default values will be used for all parameters.

[OPTIONAL]

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-396: CLI on line help on “insert-all” command usage in this node context

7.6.17.5.7 “reboot” command

Name

reboot

Description

Send the reboot command to one ONU.

Full path

/remote-eq/discovery/reboot

Mandatory Parameters

Screen Output

Table 7-359: “reboot” command information

/cli/remote-eq/discovery> reboot ?

Usage REBOOT:

REBOOT Send the reboot command to one ONU.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-397: CLI on line help on “reboot” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands