Televes OLT 769401 User Manual Download Page 322

Page: 322 / 482

Descripción del producto

322

7.6.15 “multicast” node

+ multicast[]

+ active-groups[@status]

+ group-list[@config, @create, @remove, @show, @showconfig]

+ igmp[]

+ global[@config, @show, @showconfig]

+ proxy[@config, @show, @showconfig]

+ querier[@config, @show, @showconfig]

+ probes[@config, @create, @remove, @show, @showconfig]

+ statistics[@show]

Figure 7-310: “multicast” node tree

7.6.15.1 “active-groups” sub-node

7.6.15.1.1 ”status” command

Name

status

Description

With no arguments shows the active-channels list. With both arguments shows

the users list for the selected channel.

Full path

/multicast/active-groups/status

Mandatory Parameters

Screen Output

Table, Figure 7-312. Table parameter description Table 7-276.

Table 7-275: “status” command information

/cli/multicast/active-groups> status ?

Usage:

STATUS With no arguments shows the active-channels list. With both arguments

shows the users list for the selected channel.

[OPTIONAL]

--ip-address

IPv4 address

--serviceID

Select an OLT service by ID.

--static-group

Search for a static or dynamic group (enable|disable)

Figure 7-311: CLI on line help on “status” command usage in this node context

Figure 7-312: Output of ”status” command with no arguments in this node context”

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands