Televes OLT 769401 User Manual Download Page 257

Page: 257 / 482

257

7.6.9.3 “create” command

Name

create

Description

Create a new Protection Group.

Full path

/gpon-protection/create

Mandatory Parameters

Screen Output

Table 7-139: “create” command information

/cli/gpon-protection> create ?

Usage:

CREATE Create a new Protection Group.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--hold-off-time Hold Off Time (0..100) x100ms

--hp-lc-fail high priority: Generalized Line Card Failure

enable|disable)

--hp-losi-all-onus high priority: Generalized LOSi on all ONUs connected to

this OLT interface (enable|disable)

--p-port Identifies the Protecting Interface ID. (e.g.: pon.2)

--reversible Specify is reversion is enabled (enable|disable)

--w-port Identifies the Working Interface ID. (e.g.: pon.2)

--wtr-time Wait to Restore Time (WTR) (5..12) min

Figure 7-166: CLI on line help on “create” command usage in this node context

7.6.9.4 “remove” command

Name

remove

Description

Remove an existing ERP instance.

Full path

/gpon-protection/remove

Mandatory Parameters

--ID

Screen Output

Table 7-140: “remove” command information

cli/gpon-protection> remove ?

Usage:

REMOVE Remove an existing Protection Group.

--ID Identifies a table entry by ID, in this context.

Figure 7-167: CLI on line help on “remove” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands