Televes OLT 769401 User Manual Download Page 241

Page: 241 / 482

241

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-108: “showconfig” command information

/cli/equipment/slot> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-132: CLI on line help on “showconfig” command usage in this node context

7.6.6.4 “system” sub-node

7.6.6.4.1 “config” command

Name

config

Description

Configure Global system parameters.

Full path

/equipment/system/config

Mandatory Parameters

Screen Output

Table 7-109: “config” command information

/cli/equipment/system> config ?

Usage CONFIG:

CONFIG Configure Global system parameters.

[OPTIONAL]

--access-node Access Node ID (STRING 63)

--alarm-rep-mode Define the alarm reporting mode. (none|snmp|xml)

--auto-update Automatically upgrade the second matrix.

(enable|disable)

--contact Set the OLT contact information as appropriate

(STRING 31)

--date Set the system date as YYYY/MM/DD (UTC)

--description Set the global OLT system description (STRING 63)

--location Set the OLT location information as appropriate

(STRING 31)

--name Set the global OLT system name (STRING 64)

--numerical-rack system rack (numerical value)

--numerical-shelf system shelf (numerical value)

--numerical-sub-rack system subrack (numerical value)

--rack system rack (STRING 31)

--shelf system shelf (STRING 31)

--sub-rack system subrack (STRING 31)

--time Set the system time as hh:mm:ss (UTC)

Figure 7-133: CLI on line help on “config” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands