Televes OLT 769401, User Manual

Page: 181 / 482

EN
181
/cli>
../ clear help multicast/
showconfig
./ dhcp/ interfaces/ profiles/
synchronism/
acl/ dir ip-source-guard/ quit tree
applications/ equipment/ ip/ remote-eq/ users/
backup-manager/ erp-ring/ logs/ routing/ utils/
cd eth-protection/ mac-table/ services/
cfm-probe/ gpon-protection/ mem show
/cli>
Figure 7-9: Tab key displays commands and sub-nodes in that node
Typing
cd
followed by
tab
will start to auto-complete with node names, Figure 7-10
Pressing the
Enter
key will execute the command navigates to the specified node.
The CLI prompt displays the current location node
/cli> cd app
/cli>cd applications
Figure 7-10: Auto-complete with tab key
/cli>cd applications
/cli/applications>
Figure 7-11: CLI prompt displays current location node
tree command executed at a given node displays the full list of sub-nodes and available commands per node/sub-node, Figure 7-10
/cli/applications> tree
+ applications[]
+ firmware-upgrade[]
+ files[@check, @config, @export, @import, @remove, @show, @status]
+ onu-upgrade[@apply-file, @availableValues, @execute]
+ manager[@config, @show, @showconfig]
+ olt-upgrade[@apply-file, @import]
+ time[]
+ ntp[@config, @create, @disable, @enable, @remove, @show, @showconfig]
+ time-zone[@availableValues, @config, @show, @showconfig]
Figure 7-12: tree command output: current node, applications, sub-nodes list
In the picture above we have an example of the command tree. This command will display all the child nodes and commands for the node where
it is executed on. If it’s executed on the CLI root, it shows the complete CLI tree.
In the example above, Figure 7-12, all the applications sub-nodes and respective commands are shown.
Child nodes are preceded with a ‘+’ and indented;
Each node has a list of commands within [ ] ‘s;
Nodes that do not have commands have an empty list;
Commands are preceded with a “@” character.