background image

Copyright 1995 by SMART Devices Inc.

5945 Peachtree Corners East 

Norcross, GA 30071-1337

Table of Contents

SECTION 1

INTRODUCTION ..............................................................2

SECTION 2

FEATURES.......................................................................2

SECTION 3

CARD DESCRIPTION ......................................................3

SECTION 4

INSTALLATION.................................................................8

WIRING HOOKUP INSTRUCTIONS

.................................8

SECTION 5

CALIBRATION ..................................................................10

- A CHAIN CALIBRATION

.................................................10

- B CHAIN CALIBRATION

.................................................12

SECTION 6

OPERATING INSTRUCTIONS.........................................14

SECTION 7

SCHEMATICS ..................................................................15

LIMITED WARRANTY:  SMART products and accessories are warranted against malfunction or failure due to defects in workmanship or
materials for a period of one year from the date of shipment. If a problem occurs during the warranty period, the unit will be repaired, or
replaced at our option, without charge for materials or labor.  If air freight is requested by the dealer, the difference between air and surface
charges will be billed to the dealer. This limited warranty does not cover products that have been abused, altered, modified, or operated in
other than specified conditions.  Prior factory approval is required on all returns.  Returned equipment or defective parts must be shipped
freight prepaid to us by the dealer or customer.

Our limited warranty does not cover damages resulting from accident, misuse or abuse, lack of responsible care, or failures not attributable to
manufacturing defects, except as provided herein.  SMART Devices, Inc. makes no warranties, express or implied, including warranties of
merchantability or fitness for a particular purpose.

RETURN POLICY:  Factory authorization MUST be obtained before returning any product.  A 15% restocking charge will be issued on unused
equipment (in original box) that is returned for credit. Credit is issued to the dealers account.  The credit may be used against future purchases
and no cash transactions are offered.  All returns must be shipped freight prepaid by the dealer.  Equipment returned without a factory RA
(Return Authorization) will be refused.

SMART products are designed to deliver unsurpassed quality in workmanship and perfor-
mance.  The following information gives detailed instructions on the installation and opera-
tion of the SMART MODIIC processor.  We strongly encourage new owners of the MODIIC
to thoroughly read this entire manual before placing their new SMART product into service.
This will ensure that the MODIIC will be operated properly to give the superior performance
that it was designed to deliver.

For service or installation assistance, please call our 

Technical Support Department between the hours of 

8 a.m-5 p.m. E.S.T., Mon.-Fri.

1-800-45-SMART

Summary of Contents for MOD IIC
















Reviews: