background image

 

www.rsl.com.au 

PAGE 1 of 4  

DSL Setup - NB3300 

How to install and set up your Netcomm NB3300 

 

I

NSTALL THE 

NB3300........................................................................................................................................................................1

 

C

ONFIGURE THE COMPUTER

...............................................................................................................................................................2

 

C

ONFIGURE THE ROUTER

...................................................................................................................................................................2

 

One-page setup .............................................................................................................................................................................3

 

Advanced applications ..................................................................................................................................................................4

 

View Status....................................................................................................................................................................................4

 

 

Install the NB3300 

 
The NB3300 can connect either directly to a desktop computer or to a network via hub (either the inbuilt 4-port hub 
or an external one), switch or another router. All connections are made to the computers using an ethernet cable. 
 

• 

Use straight-through cable for connecting to a normal port (MDI-X) on a hub or switch. (Ensure the slide switch 

is set to "X" if using port 4). 

• 

Use crossover cable for connecting direct to a PC, server, or uplink port (MDI-II) on a hub or switch. (Ensure 

the slide switch is set to "||" if using port 4). 

• 

Ensure the cable is not over 100 metres in length (or service degradation will result).  

 
All connections to the Internet are made over ordinary phone cabling. Use the cabling supplied with the router or use 
your own. The service will work over ordinary phone extension cords and other phone socket appliances (double 
adaptors, etc); however, any noise over or damage to the appliances may result in problems accessing the Internet 
service. 
 

1.  Plug the power cord into the router and then into a power point.  
 
2.  The Diag light will go red while internal checks are done; once complete, it will go off.  If it does not, there may 

be some problems. 

 
3.  The power LED should light up green and stay lit.   

 

4.  Plug the phone cord into the "ADSL" port on the router and then into the plug servicing the DSL-enabled line. If 

you have multiple lines, ensure you have the correct line!  

 

5.  The ADSL Port LED should blink green until it negotiates an ADSL connection, after which it will stay steady.  

 

6.  Plug the appropriate ethernet cable into one of the ports on the back of the router and then into your network 

device (network card on PC, hub, switch, router, etc).  

 

7.  The Link/Act LED should light up yellow (10Mpbs) or green (100Mbps) and stay steady.  

 
You are now physically connected. Next you need to configure a PC to access the router, after which you can 
configure the router itself to access the Internet. 

1300 764 764

 

5888 

Summary of Contents for NB3300

Page 1: ... service will work over ordinary phone extension cords and other phone socket appliances double adaptors etc however any noise over or damage to the appliances may result in problems accessing the Internet service 1 Plug the power cord into the router and then into a power point 2 The Diag light will go red while internal checks are done once complete it will go off If it does not there may be som...

Page 2: ... to be installed This may require the Windows CD ROM and instructions are not provided here 3 Select Settings 4 Put the following information in the appropriate tabs If a tab isn t listed it doesn t require changing IP the computer s internal static IP Must be filled in unless the computer accesses a DHCP server either the router or another computer General recommendation for a generic IP address ...

Page 3: ...VCI 35 o Operation mode AUTO WAN connection type Gateway using PPPoE This automatically enables NAT in the router o Username enter the username assigned to you by RSL COM This will be in the format id rslcom net au and is not the same as your email address o Password enter the password assigned to you by RSL COM o Connect on demand leave blank o Keep alive enter 20 sec Click Apply The router will ...

Page 4: ...utgoing data and do not relate to how you connect to RSL COM Note that changing some of these options may affect your ability to connect to RSL COM so only make changes if you are certain you require the modifications eg for running servers games controlling access to the Internet and the like Use the manual that came with your router to set these applications View Status This is a useful option l...

Reviews: