Suzuki RA410, Manual

Page: 279 / 761

INSTALLATION
1) Apply sealant to oil pan mating surface continuously as shown
in figure.
“A” Sealant: 99000-31150
2) Install oil pump strainer (1) and oil pan (2).
Install seal (3) to oil pump strainer in the position as shown in
figure.
Install strainer to cylinder block, then tighten strainer bolt to spe-
cified torque.
Tightening Torque
(a): 11 N
.
m (1.1 kg-m, 8.0 lb-ft)
After fitting oil pan to cylinder block, run in securing bolts and
start tightening at the center: move wrench outward, tightening
one bolt at a time.
Tighten bolts to specified torque.
Tightening Torque
(b): 11 N
.
m (1.1 kg-m, 8.0 lb-ft)
3
3
2
3) Install gasket and drain plug (1) to oil pan.
Tighten drain plug (1) to specified torque.
Tightening Torque
(a): 44 N
.
m (4.4 kg-m, 31.8 lb-ft)
1, (a)
4) Install clutch (torque converter) housing lower plate.
6A4-20 ENGINE MECHANICAL