Suzuki RA410, Manual

Page: 599 / 761

7B-72 AUTOMATIC TRANSMISSION
“C”
2, (c)
1, (d)
37) Install needle bearing (1) to input drum and set gasket.
38) Apply sealant to bolts shown in left figure.
Tighten mounting bolts to specified torque.
Check input shaft for rotation.
Tightening torque for oil pump mounting bolt
13 N
.
m (1.3 kg-m, 9.5 lb-ft)
“C”: SUZUKI BOND 1216 (99000-31160)
39) Adjust brake band as follows.
Loosen anchor end nut (1) as far as tip end and apply sealant
to bolt.
Tighten bolt (2) to specified torque and return by two and a
half turns and then tighten lock nut to specified torque with
bolt fixed.
Tightening Torque
(c) : 2.5 N
.
m (0.25 kg-m, 1.8 lb-ft)
(d) : 19 N
.
m (1.9 kg-m, 13.5 lb-ft)