Suzuki RA410, Manual

Page: 163 / 761

5) Insert new stud bolt (1) in hub hole. Rotate stud bolt slowly to
assure that serrations are aligned with those made by original
bolt.
1
INSTALLATION
For installation, reverse removal procedure, observing following
instructions.
Using special tool, drive wheel hub (1) into steering knuckle (2)
and then install steering knuckle.
Special Tool
(A): 09913-70122
(A)
2
1
Tighten suspension arm ball joint bolt (1) to specified torque.
Tightening Torque
(a): 60 N·m (6.0 kg-m, 43.5 lb-ft)
Tighten strut bracket nuts (1) to specified torque.
Tightening Torque
(a): 100 N·m (10.0 kg-m, 72.5 lb-ft)
1, (a)
Connect tie rod end (1) to steering knuckle (2) and tighten tie rod
end castle nut (3) to specified torque.
Tightening Torque
(a): 43 N·m (4.3 kg-m, 31.5 lb-ft)
Install new split pin (4).
2
1
3, (a)
FRONT SUSPENSION 3D-15