Suzuki RA410, Manual

Page: 351 / 761

RADIATOR
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system by loosening drain plug (1) of radiator.
3) Disconnect coupler of cooling fan motor.
4) Remove front bumper (see SECTION 9).
5) Remove air cleaner case and air intake hose (see SECTION
6A4).
1
6) Remove A/C condenser mounting bolt (1) (if equipped) and ra-
diator bolts (2).
2
1
7) Disconnect radiator inlet and outlet hoses and reservoir tank
hose from radiator.
8) Disconnect radiator fan wire harness at connector.
9) Detach receiver/dryer (1) from radiator.
1
10) Hang A/C condenser with wire hook or the like so as to prevent
A/C hose from bending or twisting excessively or being pulled.
11) Remove left side stabilizer bracket (1), stabilizer mount brack-
et (2) and jack up point bracket (3) from vehicle body.
12) Remove raditor (4) with cooling fan motor.
1
1
(b)
4
(b)
2
3
(a)
Tightening Torque N·m (kg-m, lb-ft)
(a): 23 (2.3, 17.0)
(b): 50 (5.0, 36.5)
ENGINE COOLING 6B-11