Suzuki RA410, Manual

Page: 281 / 761

INSTALLATION
1) Install new gasket (1) to cylinder head.
2) Install exhaust manifold.
Tighten bolts and nuts to specified torque.
Tightening Torque
(a): 23 N
.
m (2.3 kg-m, 17.0 lb-ft)
3) Install pipe gasket and install exhaust pipe to exhaust manifold.
Before installing pipe gasket, check it for deterioration or dam-
age, and replace as necessary.
Tighten pipe fasteners to specified torque.
Tightening Torque
(a): 50 N
.
m (5.0 kg-m, 36.5 lb-ft)
4) Install exhaust manifold cover (1).
5) Connect heated oxygen sensor coupler (2) and clamp its wire
securely.
6) Install front bumper (refer to Section 9).
7) Connect negative cable at battery.
8) Check exhaust system for exhaust gas leakage.
1
2
6A4-22 ENGINE MECHANICAL