Suzuki RA410, Manual

Page: 484 / 761

INSPECTION
ROTOR
Open Circuit
Using ohmmeter, check for continuity between slip rings of rotor
(1). If there is no continuity, replace rotor.
Standard resistance: About 2.9
Ground
Using ohmmeter, check that there is no continuity between slip ring
and rotor (1). If there is continuity, replace rotor.
Slip Rings
Check slip rings for roughness or scoring. If rough or scored, re-
place rotor.
Using a vernier caliper, measure the slip ring diameter.
Standard diameter: 14.4 mm (0.567 in.)
Minimum diameter: 12.8 mm (0.504 in.)
If the diameter is less than minimum, replace the rotor.
STATOR
Open Circuit
Using ohmmeter, check all leads for continuity. If there is no conti-
nuity, replace stator.
Ground
Using ohmmeter, check that there is no continuity between coil
leads and stator core. If there is continuity, replace stator.
CHARGING SYSTEM 6H-15