8) Remove pinion bearing plug (1) with special tool.
Special Tool (43 mm socket)
(A): 09944-26011
(A)
1
9) Tap on position as shown with plastic hammer (2) to separate
pinion assembly (1) from housing.
1
2
10) Remove pinion assembly.
11) Remove rack from gear case (1). Direction for rack removal is
as shown.
CAUTION:
Inside of steering rack bushing is coated with special
coating. As it is damageable, be very careful not to cause
damage to it when removing rack from steering gear
case.
1
MANUAL RACK AND PINION
3B-7
Summary of Contents for RA410
