Suzuki RA410, Manual

Page: 144 / 761

7) Tighten mounting nuts to specified torque in the order “A” – “B”
– “C” indicated in figure.
Tightening Torque
(a): 14 N·m (1.4 kg-m, 10.5 lb-ft)
8) Tighten joint bolt (3) (pinion shaft side) first and then joint blot
(2) (steering column side) to specified torque.
Tightening Torque
(b): 25 N·m (2.5 kg-m, 18.0 lb-ft)
9) Install steering joint cover (1).
“A”, (a)
“C”, (a)
“C”, (a)
“B”, (a)
2
1
3
2
10) Install steering column hole cover (1).
11) If steering wheel is removed, install steering wheel. Refer to
STEERING WHEEL in this section.
12) For vehicle with air bag system:
Enable air bag system. Refer to ENABLING AIR BAG SYS-
TEM under SERVICE PRECAUTIONS in SECTION 10B.
13) Connect negative cable at battery.
1
STEERING WHEEL AND COLUMN 3C-15