Suzuki RA410, Manual

Page: 525 / 761

27) Clean mating surface of guide case.
28) Install gear shift and select shaft assembly (1) with new gasket
into transmission and tighten it to specified torque.
Tightening Torque
(a): 23 N·m (2.3 kg-m, 17.0 lb-ft)
29) Install washer and gear shift interlock bolt (2) applied with seal-
ant and then tighten it to specified torque.
“A”: Sealant 99000-31110
Tightening Torque
(b): 23 N·m (2.3 kg-m, 17.0 lb-ft)
30) Install washer and 5th to reverse interlock guide bolt (3) ap-
plied with sealant and then tighten it to specified torque.
“A”: Sealant 99000-31110
Tightening Torque
(c): 23 N·m (2.3 kg-m, 17.0 lb-ft)
31) Tighten back up light switch (4) to specified torque.
Tightening Torque
(d): 19 N·m (1.9 kg-m, 13.5 lb-ft)
1
4, (d)
3, (c), “A”
2, (b), “A”
(a)
(a)
32) Check input shaft for rotation in each gear position.
33) Also confirm function of back up light switch in reverse position
using ohmmeter.
7A-32 MANUAL TRANSMISSION