Suzuki RA410, Manual

Page: 507 / 761

13) Remove 5 screws (1) and take off left case plate (2), and then
remove bearing set shim (3).
1
3
2
14) Remove reverse shaft bolt (1) with washer.
15) Remove 9 case bolts (2) from outside and another 5 from
clutch housing side.
16) Tapping case flanges with plastic hammer and remove left
case (3).
1
2
3
17) Remove reverse gear shift lever bolts (1) and reverse gear
shift lever (2).
18) Pull out reverse gear shaft (3) with washer, then take off re-
verse idler gear (4).
19) Pull out 5th & reverse gear shift guide shaft (5) together with
5th & reverse gear shift shaft (6).
NOTE:
When removing 5th & reverse gear shift shaft and guide
shaft, push up high speed gear shift shaft and shift it to
4th to facilitate removal of 5th & reverse shifter.
6 5
3
4
1
2
20) Tapping input shaft end with plastic hammer, push it out as as-
sembly from right case (1) a little, then take out input shaft as-
sembly (2), counter shaft assembly, (3), high speed gear shift
shaft (4) and low speed gear shift shaft (5) all at once.
1
5 4
2
3
7A-14 MANUAL TRANSMISSION