Suzuki RA410, Manual

Page: 179 / 761

REAR AXLE
REMOVAL
1) Hoist vehicle and remove rear wheels (right & left).
2) Support rear axle (1) using floor jack (2).
3) Remove rear brake drums (right & left). For details, refer to
BRAKE DRUM REMOVAL in SECTION 5.
4) Remove E-ring (1) (right & left) securing brake hose (2).
CAUTION:
Do not allow brake fluid to get on painted surfaces.
2
1
5) Disconnect brake pipe flare nuts (1) from wheel cylinders (2)
(right & left) and put bleeder plug cap (3) onto brake pipe (4)
to prevent fluid from spilling.
2
1
4 3
3
4
6) Remove brake back plates (1) (right & left) from rear axle and
hang removed back plate with a wire hook.
7) Remove lateral rod left side nut (1).
8) Detach lateral rod (2) left side from rear axle.
1
2
3E-12 REAR SUSPENSION