Suzuki RA410, Manual

Page: 751 / 761

WARNING:
For handing and storage of a live seat belt pretension-
er, select a place where the ambient temperature be-
low 65
C (150 F), without high humidity and away from
electric noise.
Never carry the seat belt pretensioner by the wire or
connector of the pretensioner.
When placing a live seat belt pretensioner on the work-
bench or other surface, be sure not to lay it with its ex-
haust hole provided side facing down. It is also
prohibited to put something on its face with an ex-
haust hole or to put a seat belt pretensioner on top of
another.
Otherwise, personal injury may result.
1
5) [In case of driver air bag (inflator) module]
a) Clear a space on the ground about 185 cm (6 ft) (3) in diame-
ter where the driver air bag (inflator) module (1) is to be
deployed. A paved, outdoor location where there is no activ-
ity is preferred. If an outdoor location is not available, a space
on the shop floor where there is no activity and sufficient ven-
tilation is recommended.
Ensure no loose or flammable objects are within the deploy-
ment area.
b) Place the driver air bag (inflator) module (1), with its vinyl trim
cover facing up (2), on the ground in the space just cleared.
2
1
3
[In case of Passenger Air Bag (Inflator) Module]
a) Clear a space on the ground about 185 cm (6 ft) in diameter
where the fixture (special tool) with attached air bag (inflator)
module is to be placed for deployment. A paved outdoor
location where there is no activity is preferred. If an outdoor
location is not available, a space on the shop floor where
there is no activity and sufficient ventilation is recom-
mended. Ensure that no loose or flammable objects are with-
in the deployment area.
10B-56 AIR BAG SYSTEM