Suzuki RA410, Manual

Page: 508 / 761

SUB ASSEMBLY SERVICE
NOTE:
Before installation, wash each dart and apply specified gear
oil to sliding faces of bearing and gear.
Use new circlips on shaft for installation. Don’t reuse cir-
clips.
RIGHT CASE
DISASSEMBLY
1) Remove bolt and then pull out vehicle speed sensor (1) from
right case (2).
1
2
2) Remove counter oil gutter plate (1) from right case (2).
3) Remove differential gear assembly (3) from right case.
2
3
4) Remove input shaft oil seal (1) using special tools (combination
of bearing remover and sliding shaft).
Special Tool
(A): 09930-30102
(B): 09923-74510
5) Also pull out countershaft right bearing cup (2) using special
tools.
Special Tool
(A): 09930-30102
(C): 09941-64511
NOTE:
If input shaft right bearing has been left in right case, pull
it out by using bearing remover 09923-74510 with sliding
shaft 09930-30102.
6) Remove differential side right oil seal using screw driver.
(A)
(A)
(C)
(B)
1
2
MANUAL TRANSMISSION 7A-15